5. Finally face the camera upwards 6. Put the drone belly up 2. Refresh the Phantom 4’s firmware in DJI assistant 2. If the calibration process is not working, chances are there is a software issue that is supposed to get fixed. To do that I will show you a couple of ways. Let us start by refreshing the firmware. Power on the drone

The DJI's iOS PanoDemo is written in Objective-C, I have tried it on a Phantom 4 Pro, the demo app can show the live video feed successfully. Seems like you are writing your own DJI SDK app using Swift. In the code you show above, I think you haven't registered the app successfully.
1#. Normally i connect wifi between my phone with camera. But now i dont connect, check bind on dji app see: wifi repeater connection failed. So i check wifi extender is power is strong, but system is not blind. Signal is fix. So that the wifi extender have problem. It not work. Here's another puzzler: I got out my Phantom 2+ after about a year, charged up the batteries and got ready to fly. Everything worked fine except that the DJI Vision app that I have installed on both my iPhone and IPod would not show the camera view. Everything else worked, including controlling the camera (tilt, still pics, video start and stop). Not able to access mi DJI Vision App on Iphone 5. It had been working fine. Hadn't used the Phantom Vision Plus in a few months. Set it up and wasn't able to find app on phone, reloaded app, hit next for 7 screens then asks for login. Keep getting message that its the wrong login. It's NOT. Any feedback would be great 5#. Hi, Today I tried to fly my DJI Phantom 2 Vision plus everything seems okay after calibrating compass when I start DJI Vision app on my android cell the video feed was not showing up. First I thought something is wrong with camera, however I soon realize that camera is working fine as all pictures and videos I tried were saving successfully Please note step 1 is not enough. To force close an app, go to your mobile device Settings - Apps - DJI Go (or other app name) - Force close. -Start your aircraft and remote controller if you are using one, and let them initialize for a few seconds. -Connect to the Wi-Fi network of the aircraft. -Start Litchi.
On first day of use, vision sensor calibrate alarm appeared. I tried to calibrate this a number of times using the DJI4 app. This did not work. Then I downloaded the DJI assistant, and connected the Mavic to my laptop. This does not progress, - with the calibrate button greyed out, and an instruction to reboot. When I do this there is still no progress. Running out of ideas here. Thanks.
How To Calibrate Phantom 4 Compass Steps. Choose an open area outside to carry out the Phantom 4 compass calibration. Remove the propellers before you start the compass calibration. Tap the Aircraft Status Bar in the DJI Go 4 app and select “Calibrate”. A popup message appears asking you to “Press start to begin compass calibration”. Jun 9, 2017. #2. The ribbon cable controls the gimbal motors. The silver cable is for the camera. If you still do not have gimbal movement, the ribbon cable could be the culprit. Did you use a a genuine DJI ribbon cable? After market ones are worthless in my opinion due to how faulty they can be.

I carried out the latest firmware update on my Phantom 4 in late January 2020. The firmware installation failed and the camera stopped operating. All was working correctly prior to the update. I tried the DJI Assistant 2 to no avail to repair the issue. I then contacted Ferntech NZ Ltd and sent my P4 to them in early February 2020.

Jun 27, 2015. #14. P2 Vision+ with Samsung S5, after return from DJI to install new camera, have black screen, called DJI tech and he said to bind to the MAC address on the WIFI extender (Totally WRONG), have tried several times to bind with Phantom Camera both the QR code and Manual rebind, I think somehow when DJI installed new cam, they Options DJI Phantom 2 Repair The DJI Phantom 2 is a quadcopter with an optional brushless camera gimbal produced by DJI. It has a 25-minute maximum flight time and an automatic return-to-home and landing feature but does not include a camera. It was released in December 2013. Author: Jose Gustavo Abreu Murta (and 5 other contributors) #1 My camera is not transmitting to my android phone or iPad. Says connection lost. I have replaced the WiFi module and have preformed binding to the range extender. Still the same message. When I replaced the module, I found the module in the bird had a dent in it, from a bad crash. However, the camera worked on a flight last fall after the crash.
This is how I turn on my Phantom: 1.Turn on controller 2.Turn on range extender 3.Turn on Phantom 4.Calibrate Phantom This is what I do to start flying: 1.I connect my iPhone with WiFi to "Phantom" network. 2.I can receive live camera feed on iPhone so everything is good and working fine, all signals and calibration are good.
Open the DJI Assistant 2 and wait until it connects to your DJI Phantom 4. Select DJI Phantom 4 and start the Calibration process. Tap on the button “Start Calibration” that is located on the bottom right side. Place the front side of your Phantom 4 Vision Sensors to look towards the screen.
Supported Battery. DJI 5200mAh LiPo Battery. Weight (Battery & Propellers included) 1242g. Hover Accuracy (Ready to Fly) Vertical: 0.8m; Horizontal: 2.5m. Max Yaw Angular Velocity. 200°/s. Max Tiltable Angle.
Phantom 2 Prop Guard Attachment Instructions 1.00 2014-01-24. pdf. Phantom 2 FPV HUB Kit Instruction 1.0 2014-01-24. pdf. iOSD mini User Manual 1.06 2014-04-07. pdf. - Intelligent Flight Battery Safety Guides 2014-10-15. pdf. Phantom 2 Vision+ - Intelligent Flight Battery Safety Guides 2014-10-15.
I got a new Phantom 2 with H3-3D gimbal, iOSD mini, and fpv. Got everything mounted and hooked up. I powered up to test the fpv, gimbal, and iOSD and all worked fine. Then I wanted to make sure all firmware was updated before first flight, as many have stated this was imperative to prevent potential fly-always. Firmware seemed to update properly. Then I power cycled and now the gimbal does
.